We machine parts from steel, stainless steel, titanium, aluminum, brass and plastic on our 3 and 4 axis capable cnc milling machines. By using creative fixturing and part locating techniques we are able to reduce both setup and cycle times resulting in lower end cost.
| Haas VF2 Milling Centre (2006) | ||
|---|---|---|
| Machine Travels | Imperial Units (in.) | Metric Units (mm) |
| Maximum X Axis | 30 | 762 |
| Maximum Y Axis | 16 | 406 |
| Maximum Z Axis | 20 | 508 |
| Spindle Taper | #40 Taper | |
| Maximum Spindle Speed | 7500 RPM | |
| Maximum Torque | 75 ft-lb @ 1400 rpm | 102 Nm @ 1,400 rpm |
| Maximum Motor Rating | 20 HP | 14.9 kw |
| Rapid Traverse | 1000 in/min | 25.4 m/min |
| Tool Capacity | 20 Tools | |
| Tool Change Time | 4.2 Seconds | |
| Accuracy: | ||
| Positioning (±) | 0.0002 " | 0.0051 mm |
| Repeatability (±) | 0.0001 " | 0.0025 mm |
| Haas VF4 Milling Centre (2007) | ||
| Machine Travels | Imperial Units (in.) | Metric Units (mm) |
| Maximum X Axis | 50 | 1208 |
| Maximum Y Axis | 20 | 570 |
| Maximum Z Axis | 25 | 635 |
| Spindle Taper | #40 Taper | |
| Maximum Spindle Speed | 10,000 RPM | |
| Maximum Torque | 75 ft-lb @ 1400 rpm | 102 Nm @ 1,400 rpm |
| Maximum Motor Rating | 20 HP | 14.9 kw |
| Rapid Traverse | 1000 in/min | 25.4 m/min |
| Tool Capacity | 20 Tools | |
| Tool Change Time | 4.2 Seconds | |
| Accuracy: | ||
| Positioning (±) | 0.0002 " | 0.0051 mm |
| Repeatability (±) | 0.0001 " | 0.0025 mm |
| A-56/A-56+APC Specifications: | ||
| Control Unit | FANUC series | |
| MITSUBISHI-MELDAS series | ||
| Spindle | R.P.M. | 80~8000rpm(STD.) 120~12000rpm(OP.) |
| Spindle taper | ISO#40 | |
| Spindle motor | 7.5kw (10HP) | |
| Table | LengthxWidth | 600*400mm(23.62"*15.75") |
| Working area-X,Yaxis | 560*410mm(22.05"*16.14") |
|
| Main Travel | X/Y/Z-axis travel | 560/410/410mm (22.05"/16.14"/16.14") |
| Feed | Rapid traverse X/Y/Z axes | 48m/min(1890 1PM) |
| Cutting feedrate | 1~15000mm/min (0.039-590.55 IPM) | |
| Automatic Tool Change | Tool specification | BT-40 |
| Tool change time | (60HZ/16T) | |
T.-T. |
1.25 sec 2.5 sec 16+1/24+1(OP.) 80mm(3.15") |
|
| Tool change method | Double ARM swing method | |
| Tool selection method | Random | |
| Automatic Pallet Changer | Exchange method | Pallet lift+180° rotary |
| Changing time | 6.5 ± 2sec. | |
| Net weight/Gross weight | 5000 / 5500kgs (11000/12100 lbs) | |
